background image

Step 

Page 31

Step 26

 å

To make adjustments to the pencil drawer and fi le drawer, loosen SCREW #3 in the SLIDES a 1/4 turn, then turn the CAM
clockwise or counter-clockwise. Notice how the drawers raise or lower as you turn the CAM. The higher the screw in 
the oblong hole, the higher your drawer fronts will be. The lower the screw, the lower the drawer fronts. By adjusting the 
drawers this way, it will help the DRAWER FRONTS line up better when closed. Tighten the SCREW when fi nished with 
adjustments.

Cam

Cam

The higher the screw in the oblong hole, the 
higher your drawer front will be. The lower 
the screw, the lower the drawer front.

The higher the screw in the oblong hole, the 
higher your drawer front will be. The lower 
the screw, the lower the drawer front.

Loosen screw #3 a 1/4 turn, turn the cam a 1/4 turn 
maximum in both the clockwise and counter-clockwise 
directions to make adjustments, and then tighten screw #3.

Loosen screw #3 a 1/4 turn, turn the cam a 1/4 turn 
maximum in both the clockwise and counter-clockwise 
directions to make adjustments, and then tighten screw #3.

Hey! It's starting to look 
like something!

Summary of Contents for Spanish Style Desk 5420114


































Reviews: