Step 7
Page 11
å
Separate the EXTENSION SLIDES (2) from the EXTENSION RAILS (1) as shown in the upper diagram below. Be
prepared, the parts are greasy.
å
Fasten six EXTENSION RAILS (1) to the ENDS (A and B) and UPRIGHTS (C and D). Use twelve BLACK 1/2" MACHINE
SCREWS (16).
å
NOTE: For each EXTENSION RAIL, turn a SCREW into the hole shown in the enlarged diagram. Then, slide the inner
cartridge of the EXTENSION RAIL in to fi nd the other hole that lines up with the hole in the ENDS and UPRIGHTS. Turn
a SCREW into this hole.
å
NOTE: The EXTENSION SLIDES will be used later for the DRAWERS.
BLACK 1/2" MACHINE SCREW
(12 used in this step)
16
Push the black lever up and
pull the SLIDE from the RAIL.
1
2
Use these holes.
Open end
C
D
A
B
1
1
1
Open end
1
1
Open end
1
