manualshive.com logo in svg

Tekelec Business Analog Telephone, User Manual

Share
Download
Tekelec Business Analog Telephone User Manual Download Page 56

Business Analog Telephone User Guide

Telephone Features

45

620-05600190

5.

Enter the number with no spaces, dashes or special characters, followed by 

the 

#

 key.

6.

Press 

#

 to save the entry (delete it from your list), or press * to cancel the 

entry,

7.

Select another menu item or hang up.

8.

Press 

2

 to hear the list of number and have the option to delete them as you 

go through the list.

The voice prompt announces the list, speaks the first number and prompts 
you to press 

1

 to delete it, 

#

 to hear the next number or 

*

 to return to the 

Selective Call Forward menu.

9.

Press 

#

 until you find the number you wish to delete.

10.

Press 

1

 to delete the number.

The number is deleted immediately and the next number in the list is 
announced.

11.

Press 

1

 to delete it, 

#

 to hear the next number or 

*

 to return to the Selective 

Call Forward menu.

12.

Repeat the previous three steps until you have found and deleted as many of 

the numbers as you want.

13.

Press 

*

 to return to the Selective Call Forward menu or hang up.

14.

Press 

3

 to immediately delete all member numbers.

The voice prompt announces that all phone numbers have been removed 
from the list and you are returned to the Selective Call Forward menu.

15.

Select another menu item or hang up.

Transfer

Use this feature to transfer a call to another number. See also “Blind Transfer” on 
page 6.

1.

Tell the calling party you will transfer the call, then flash the switchhook.

The call is placed on hold and you hear a dial tone.

2.

Dial *08.

3.

Dial the number to which you want to transfer the call.

4.

If the called party answers, you can inform them of the transfer and do one of 

the following:

•

Hang up and let the call transfer.

•

Flash the switchhook to cancel the transfer and return to the holding party.

Summary of Contents for Business Analog Telephone


















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands