background image

Page 5                                                                                                                                                                                                                                                                                                  Page 6  

?  

Scan:  

Pressing and releasing 

SCAN

 button (for less 

than 1 second) to activate scanning.  Scan mode 
is either in Normal (Scan 1,2,3,4...) or Priority 
(Scan 1,16,2,16,3,16...) depending on user’s 
programming.  A text appears on the display to 
indicate the Scan Function is active.  When the 
scan function is active, press and release 

SCAN

 

button to deactivate scan function. 

 

?  

Dual/Tri Watch:  

Press and release 

WATCH

 button (for less than 1 

second) to activate dual or tri-w atch function 
depending on user programming.  Characters 
appear on the display to indicate each watch 
function.  When dual or tri watch is active, press 

WATCH

 button to deactivate.  

 
?

 16/9: 

Press and release 

16/9

 button to select channel 

16 first; further presses of 

16/9 

toggle between 

channels 16 and 9.   

 
      Distress: 

Press and release the 

DISTRESS

 button to send 

a DSC Distress call.  MMSI and Nature of 

Distress are included in the signal.  Position and 
time are included in the broadcast if appropriate 

NMEA data is available.  See DSC Operation for 

details of sending the call. (According to EN 301-
025, this button is covered by a spring loaded 

cover) 

 

 

The Distress Function or any other 
TRANSMITTED DSC function does not operate 

unless a user’s MMSI has been entered. 

 

       LCD:  

Large LCD (1“ ×1.5”) with viewable area of 4×12 

dot matrix makes it easy to be read. 

 

       Built-in Speaker:  

Guarantees a clear ring and voice 

communication. 

 

 

 

 

 
 

2.1.2  BASE STATION (REAR) 

 

 

 

 

 

 

 

?  

Antenna Jack:  

Connects a suitable antenna to your marine VHF 

radio to get a satisfying communication. 

 

 

?  

Power Source: 

Connects the radio to a 13.8 V DC power source. 

 

?  

 Jack socket for external speaker : 

 If need, you can also use this cable to  

Connect an external speaker.  

 
 

?

 GPS connect 

Connects the radio to a GPS receiver to acquire 
the position and time information of your vessel. 

 

 

 

 
 

Summary of Contents for TM-338


























Reviews: