Touch control user instructions
(
TZ 3210
)
CONTROL PANEL ELEMENTS
(see fig.4)
On/off sensor button.
Indicators of the heating element.
Power and/or residual heat indicators.
Power reduction sensor button (less).
Power increase sensor button (more).
Locking sensor button (locks the rest of
sary put pressure on the glass; by simply
touching the sensor with your finger you will
activate the desired function.
Each action is confirmed with a beep.
The first time you connect the hob to the
electricity or if a power outage occurs, the
device will carry out a self-check and will
remain with the "lock activated" (indicator
light 7 on).
Press the locking sensor
(6) until the
indicator light turns off. The hob will beco-
me unlocked.
TURNING ON THE APPLIANCE
1
Touch the on sensor
(1) for at least
one second.
The touch control panel will become acti-
vated and you will hear a beep. If a coo-
king zone is hot, the corresponding indica-
tor will show an
H
and a
0
alternately.
The next action must be taken within 10
seconds; otherwise, the touch control
panel will turn off automatically.
When the touch control panel is activated,
it can be disconnected at any time by tou-
Use and Maintenance
1
2
3
4
5
6
7
8
NOTE:
* Only
v�s�ble
when
dev�ce
�s
�n
ope-
rat�on
.
Act�ons
are
carr�ed
out
us�ng
the sensor s
marked on the control panel. It
�s
not neces-
the sensors, except on / off sensor).
Indicator light of the activated locking
Decimal point.
GB
34
