Teka Airtech P10, Operating Instructions Manual

Page: 3 / 28

12. EC declaration of conformity 24
13. Training protocol 25
14. Maintenance intervals 26
14.1. Usage-related maintenance 26
14.2. General maintenance 26
14.2.1. Visual inspection of the device 27
14.2.2. Visual inspection of the pipelines for dust deposits 27
14.2.3. Visual inspection of the pneumatic pipes 27
14.2.4. Functional test of the device 28
14.2.5. Electrical test of the electrical lines and earthing connections 28
1. General
Congratulations on purchasing the product from TEKA.
Our engineers ensure that our devices reflect the state of the art through continuous development.
Nevertheless, misuse or misconduct can endanger your safety. Please observe the following for a
successful use of the device:
Only authorised and instructed personnel can carry out transport, operation,
maintenance and repair of the device. The operator must ensure that the operating
personnel take note of these instructions.
Please read these instructions before operating the device, and observe the safety
precautions to avoid injury!
Store this manual in a safe place! These instructions are to be regarded as a component
of the product!
Adhere to all product notes!
Modifications or conversions that the operator carries out at the device without the
consent of the manufacturer, can lead to new safety hazards or to the loss of warranty
claims.
Observe the manufacturer’s instructions. Contact the manufacturer in case of any
uncertainty:
Tel:
+49 2863-9282-0
E-mail: info@teka.eu
BA_Airtech_P10_IFA_190319_EN 3 19.03.2019