Tek-Trol Tek-LCD 7802A, Instruction Manual, Page: 26 / 43

4.4.10 Manual or Automatic Total Reset Function ( trST )
The meter may be programmed to reset the total either manually using the Reset button or
automatically. Manual reset button may be disabled to avoid inadvertent total reset.
The automatic reset is based on the set point programmed in the Advanced menu:
OUTPUT
→
Alr
m
→
totAl. Once the set point is reached, the meter waits for a programmed amount
of time (t dly) and then resets the total to zero.
•
To enable total reset by
Reset
button, choose
m
An
→
EnAbl.
•
To disable total reset by
Reset
button, choose
m
An
→
dsAbl.
•
To reset total upon total alarm set point, choose auto, enter a time delay (tdly), and proceed
to programming the set point, see page 30.
Press the Enter button, at any time, to accept a setting or Menu button to exit without saving
changes.
Press the Enter button, at any time, to accept a setting or Menu button to exit without saving
changes.