Installation and connection
10
DL bus and CAN bus connections
Electrical measuring
CAN bus
(C-L, C-H
+12 V, GND)
CAN-Low, CAN-High, +12 V, earth
The principles of bus cabling are described extensively in the manuals for the free-
ly programmable controllers and must be observed.
DL bus
DL bus interface for DL sensors (e.g. FTS-DL (with intermediate board))
Parameterisation:
DL bus
menu (any
analogue
input)
Connection between DL and GND
Ext. connec-
tion Antenna
No screws should be used to secure the antenna cable – press and pull to con-
nect and terminate.
