Preparation for Use
2-7
10 TEGAM WAY ● GENEVA, OHIO 44041 ● 440
-466-
6100 ● FAX 440
-466-
6110 ● [email protected]
Making Your First Resistance Measurement
TEGAM’s
700
Serie
s
Handheld Bond Meters
are designed for easy
operation, while still
providing a feature
-
rich experience via the intuitive user interface.
To get started making resistance measurements right away, follow these steps:
1.
Perform
Section 3.2, Battery Installation and Replacement
2.
Connect probes
to uni
t.
Be sure to check the orientation of the connector
as it is
installed
.
Once the connector is lined up with the plug, push the plug into the
connector and twist
the
outer ring of
the
connector
clockwise.
3.
Press
to turn unit on;
4.
The unit will light all segments of the display as it performs
a
power on
self
-test;
5.
The instrument
will display a resistance if
connected to a device or
“-----”
if
not
connected. If kelvin
clips are connected and closed, “nodut” will be displayed
;
6.
Press
t
o change ranges or to put unit in Au
to-
Range mode.
Congratulations! You’r
e
now ready to make accurate and reliable resistance measurements,
wherever and whenever you may need to.
We know you are eager to begin using your new bond meter, but this overview is just the
beginning. Please take a moment to familiarize yourself with this Operation Manual to learn
about all the features and benefits of your new TEGAM Handheld Bond Meter
.