Operating Instructions
4-6
10 TEGAM WAY ● GENEVA, OHIO 44041 ● 440
-466-
6100 ● FAX 440
-466-
6110 ● [email protected]
Invalid Measurement Indications
The LCD display indicates when a measurement
is
invalid, as shown in
Figure 5
below.
I
NDICATION
D
ESCRIPTION
—————
The device is auto ranging
.
OVER and
-----
Reading is 110% of full scale or higher.
If possible, switch to a higher
range.
UNDER
Reading is 10% of full scale or less. If possible, switch to a lower
range.
OPEN, 1, 2
If the leads become electrically disconnected, the OPEN segment will
illuminate along with segment 1, 2, or both to indicate the
disconnected channel.
“nodut”
The device does not detect a DUT
.
(
no
d
evice
u
nder
t
est)
This
message will appear when Kelvin Clips are connected and closed. This
message does not appear
in Auto
-
Hold Mode
.
Figure 5: Invalid Measurement Indications
