Preparation for Use
2-
5
10 TEGAM WAY ● GENEVA, OHIO 44041 ● 440
-466-
6100 ● FAX 440
-466-
6110 ● [email protected]
Unpacking and Inspection
Each
instrument is electrically and mechanically inspected before shipment. Upon receiving
your new TEGAM Handheld Bond Meter, unpack all items from the shipping container and
check for any obvious damage that may have occurred during transit. Use the original
packing materials if reshipment is necessary.
If any dents, broken, or loose parts are seen, do not use the equipment. Notify TEGAM
immediately.
Check that all items are present. If any items are missing, notify TEGAM immediately.
The following items are included with every new instrument:
•
One (1) Handheld Bond Meter
;
•
One (1) Safety Notices Booklet;
•
One (1) Operation Manual;
•
One (1) Quick Start Guide;
•
Statement of Traceability;
•
Three
(3) AA, 1.5 V batteries; and
•
Optional accessories (if purchased).
Battery Installation and Replacement
Three (3) AA 1.5 V batteries are
supplied with the instrument, but not installed. Read the
following battery replacement
instructions before attempting to install or remove the
batter
ies.
Use only Zinc
-
Manganese Dioxide or Alkaline
-
Manganese Dioxide AA cells
that have been tested by a nationally recognized laboratory to meet the
requirements of UL 60079
-
11, Sixth Edition.
Use of any other battery will invalidate the
T
ype Certificate and create a hazardous
condition. The only batteries that TEGAM, Inc. has secured such testing, which are
approved for use in the 720A,
are listed on the Type Certificate. They are:
•
Energizer E91
•
Duracell MN1500
