TEFAL P25804, User Manual

Page: 37 / 133

* Basket and timer not included with certain models.
■
DESCRIPTIVE DIAGRAM
A. Operating valve
B. Steam release outlet
C. Safety valve
D. Pressure indicator
E. Lid release button
F. Lid handle
G(a). Lid positioning mark
G(b). Lid-pot positioning mark
G(c). Timer holder*
G(d). Timer*
H. Operating valve positioning
mark
I. Lid gasket
J. Steam basket*
K. Trivet*
L. Long pot handle
M. Pot
N. Short pot handle
O. Maximum marks (Max1
and Max 2) for filling
■
COMPULSORY CHECKS PRIOR TO EACH USE
Checking the Operating Valve
• Check that the operating valve’s steam release outlet is not obstructed. Clean
if necessary using a toothpick (see section ‘To clean the steam release outlet’
page 22)
Checking the Safety Valve
• Check that the piston is mobile (press the piston several times with your
finger). (see section ‘To clean the safety valve’)
70
69
EN
RETAIN THESE INSTRUCTIONS
CLEANING AND MAINTENANCE
If you notice that any part of your pressure cooker is broken or
cracked, do not attempt to open it under any circumstances. Wait for
it to cool down completely before moving it. Do not use it again and
take it to a TEFAL Approved Service Centre for repair.
Do not tamper with the safety systems other than when following the
cleaning and maintenance instructions.
Only use the genuine TEFAL parts that correspond to your model.
Do not leave food in the pressure cooker.
Wash and rinse your pressure cooker immediately after each use.
Never put the operating valve (A) , the gasket (I) , the cook control* (G
(d)) , in the dishwasher.
Never place the timer* (G (d)) in water.
Never use bleach or chlorine-based products, which could affect the
quality of the stainless steel.
Do not let the lid soak in water.
Change the gasket every year, or immediately if it is split or shows
signs of cracking..
Make sure you get your pressure cooker at a TEFAL Approved Service
Centre after 10 years of use.
To store your pressure cooker: rest the lid upside down on the pan, to
avoid premature wear of the lid’s gasket.
* Depending on model.