TEFAL Home B, User Manual

Page: 10 / 20

Practical advice
If there is a power cut: if, during the cycle, the
programme is interrupted by a power cut or mis-
handling, the machine has a 10-min protection
time during which the settings are saved.
The cycle starts again where it stopped. Beyond
that time, the settings are lost.
If you plan to run a second programme
bake a second loaf,
open the lid and wait 1
hour before beginning the second preparation.
To turn out your loaf of bread: it may happen
that the kneading paddle remain stuck in the
loaf when it is turned out. In this case, use the
hook accessory as follows:
> once the loaf is turned out, lay it on its side
while still hot and hold it down with one hand,
wearing an oven glove,
> with the other hand, insert the hook in the axis
of the kneading paddle - M ,
> pull gently to release the kneading paddle - M ,
> turn the loaf upright and stand on a grid to
cool.
Delayed start programme
This step comes after selecting the programme,
browning level and weight. The programme
time is displayed. Calculate the time difference
between the moment when you start the pro-
gramme and the time at which you want your
preparation to be ready. The machine automat-
ically includes the duration of the programme
cycles.
Using the and buttons, display the cal-
culated time ( up and down). Short presses
change the time by intervals of 10 min + a short
beep. Holding the button down gives continu-
ous scrolling of 10-min intervals.
For example, it is 8 pm and you want your bread
to be ready for 7 am the next morning.
Programme 11:00 using the
and .
Press the button. A beep is emitted. The
timer colon blinks. The countdown begins.
The operating indicator light comes on.
If you make a mistake or want to change the
time setting, hold down the
button until it
makes a beep. The default time is displayed.
Start the operation again.
With the delayed start programme do not use
recipes which contain fresh milk, eggs, soured
cream, yoghurt, cheese or fresh fruit as they
could spoil or stale overnight.
M
10
You can programme the appliance up to start 15 hours in advance to have your preparation
ready at the time you want. This function cannot be used on programmes 6, 7, 9, 12.