Owner’s manual
8
EN
OPERATION
Power on
Plug the appliance into power supply mains and press power button. The power indicator
will be illuminated, and the low steam level indicator, regarded as default one, will blink.
Temperature knob
Turn the knob to set ironing temperature.
Temperature indicator
When the iron is heating up, the temperature indicator will be illuminated. Once the iron has
reached the selected temperature, it will extinguish.
Steam level control
The steam level can be selected low, medium or high with the steam level control button.
After powering on the device, the low steam level indicator, regarded as default one, will
blink. To change steam level, press the steam level control button. After few minutes, the
indicator will be changed to constant light. Once the indicator shines constant light, user can
press the steam burst button to emit steam.
Steam burst button
Press the steam burst button, the steam will be emitted from the soleplate as long as the
button is pressed.
Water shortage indicator
If the steam burst button is pressed and hold, but there is not enough water in the tank, the
water shortage indicator will be illuminated within 1 minute while the button is held pressed.
It prompts to add water into the tank.
Filling aperture cap
disconnect the device from power supply beforehand for safety reasons.
If there is not enough water in the tank, grasp the water tank (press the release button under
the tank’s handle at the front of the device) and pull to detach the tank. Open the aperture
Reset button
After the water shortage indicator is illuminated, indicating the water shortage in the tank,
button to make the water shortage indicator extinguish and then you can release steam for
ironing.
