User Guide - 2.3 General operation
Teenage Engineering
– User Guide (LD)
Janvier 2019
14/59
2.3.4 Editing operations
add note
Press an empty step to
add the last played
note to that step
clear step
Press a lit “step”1-16
(indicated by red light)
to clear it
copy step
Press and hold a lit
“step”1-16 to copy it
to memory
Copying another note
or playing a note using
the musical keyboard
replaces the copied
step in memory
paste step
Whenever a step is
copied to memory,
pressing any empty
“step”1-16 will paste it
edit step note
Hold a lit “step”1-16 and
press notes to change
the notes for that step
add parameter lock
Hold a lit “step”1-16 and
turn any dial to set or
edit the dial parameter
for that step
clear parameter locks
Hold REC and STOP and
wait until all “steps”1-16
are lit. This will clear all
parameter locks on the
current track. release
before to abort
To clear parameter locks
per
step
hold
the
“step”1-16 and hold
STOP until all “steps”1-
16 are lit
clear track
Hold TRACK and STOP
and wait until all “step
lights”1-16 are lit. This
will clear all triggers on
the
current
track.
Release before to abort
note length
Hold a lit “step”1-16 and
press another “step”1-
16 to set the duration of
the held step
micro timing
Press and hold a
“step”1-16 and press –
/+ to shift timing of that
step 1 tick back or
forward
each
step
has
a
resolution of 24 ticks
preview step
Holding a lit “step”1-16
while the sequencer is
stopped will play a
preview of that step, as
well as copy it to
memory
change velocity
Hold a lit “step”1-16 and
use the pitch bend to
modify the velocity for
that step
2.3.5 Recording
One of the most powerful features of the OP-Z is its many possibilities to record your tweaks
and operations, whether it is through live recording or through careful step by step recording.
