www.teejet.com
InstallatIon
GPs speed sensor Installation
1. Place the GPS Speed Sensor in a location inside the vehicle that is easily
viewed while driving.
2. Mount the GPS Speed Sensor using the two screws or Velcro
®
(included).
3. Connect the GPS Speed Sensor cable to the Rate Controller
(see Miscellaneous Adapter Cables, page 2).
4. Connect the antenna cable to the antenna SMA Connector on the back of
the GPS Speed Sensor.
GPs sPeed sensor
InstallatIon and sPecIfIcatIons
GPs speed sensor operation
Icon
Indicator
Color
Description
Speed
Green
LED will blink when a ground
speed signal is present
GPS Status Blue
GPS is detected. The light
will blink consistently when
vehicle moves. If the vehicle
is stationary, the LED will
blink irregularly.
Power
Red
A solid light indicates power.
antenna Mounting considerations
1. The antenna must be located in an area with a clear view of the sky and
mounted at the highest point on the vehicle in the center of the roof.
2. If the vehicle is non-metallic, attach the metal mounting plate via the
Velcro
®
strips. Place the antenna on the metal plate.
3. Avoid overhead metal objects that may interfere with satellite signals.
4. Avoid mounting in areas that receive excessive vibration.
5. Mount antenna away from sources of electromagnetic output such as
radio antennas and electric motors.
6. Make sure the antenna’s cable can be safely routed to the cab from the
mounting position.
antenna Installation
1. Make sure the surface of the vehicle is clean, dry, and free of dust
particles.
2. Magnetically mount the antenna to a metal surface.
3. If the vehicle is non-metallic, attach the metal mounting plate via the
Velcro
®
strips. Place the antenna on the metal plate.
Metal Mounting
Plate 65-05055
Antenna mounts on
top of vehicle
GPS Speed Sensor
mounts inside cab of
vehicle
GPS Status
Indicator
Antenna SMA
Connector
Easily mounts
with two screws or
Velcro
®
(Included)
Speed Indicator
Antenna
Power Indicator
ConneCtor examples
Amphenol 7 position connector (Radion)
4-pin AMP connector (Mid-Tech/generic)
Conxall 3 position connector (Raven)
Deutsch 3 position connector (TeeJet)
