29
98-05304-EN R2
Aeros 9040 field computer
HOME
GUID
ANCE
FULL SCREEN
IMPLEMENT
INTR
ODUC
TION
GNSS
RA
TE C
ONTR
OL
APPENDIX
SE
TUP
Transfer
When in advanced job mode, the job data transfer screen allows the
transfer of selected jobs to or from a USB drive, as well as deleting
jobs.
Jobs transferred to a USB storage device can be opened and
updated using Fieldware Link. In Fieldware Link a user can input
client, farm and field data as well as copy/edit jobs for reuse of
boundaries and guidelines. From Fieldware Link, jobs can be ported
back to a USB storage device to be moved back onto the console
internal storage for use.
NOTE: When a job is active/started, Transfer options are not
available for selection. Stop the current job to enable
the function.
Jobs transferred to a storage device are removed from the
console and are no longer available for use.
1. Press DATA MANAGEMENT side tab
.
2. Press
Job data
.
3. Press
Transfer
.
4. Select from:
►Move Job data to USB storage
– used to move job data
from internal storage to USB storage
►Move Job data to Internal storage
– used to move job
data from USB storage to internal storage
►Delete Job data
– used to delete job data from internal
storage
5. Press RETURN arrow
or DATA MANAGEMENT side
tab
to return to the main Data management screen.
Figure 4-31: Job data – Transfer
Manage
When in advanced job mode, the job data manage screen allows the
creation of a new empty job, copying of a selected job's guidelines,
boundaries, applied data, prescription map and/or polygons to a new
job, as well as deleting a selected job.
NOTE: When a job is active/started, Manage options are not
available for selection. Stop the current job to enable the
function.
1. Press DATA MANAGEMENT side tab
.
2. Press
Job data
.
3. Press
Manage
.
4. Select from:
►New – used to create a new empty job with no associated
Guidelines, Boundaries, Applied Data, Prescription Map or
Polygons
►Copy – used to copy the selected job’s guidelines,
boundaries, applied data, prescription map and/or polygons
into a new job
►Delete – used to delete job data from internal storage
5. Press RETURN arrow
or DATA MANAGEMENT side
tab
to return to the main Data management screen.
Figure 4-32: Job data – Manage
NOTE: Copying applied data is not recommended as the user
will end up with two copies that can be changed. Whne
backuping up data, it is best to transfer the Job to Fieldware
Link and make a backup of the catalog.
Summary of Contents for AEROS 9040
Page 1: ...Software version 4 31 U S E R M A N U A L AEROS 9040...
Page 116: ......
