16
www.teejet.com
Aeros 9040 field computer
HOME
GUID
ANCE
FULL SCREEN
IMPLEMENT
INTR
ODUC
TION
GNSS
RA
TE C
ONTR
OL
APPENDIX
SE
TUP
Droplet size monitor
When the system includes a Pressure sensor interface kit (PSIK),
Droplet size monitor can be enabled/disabled. The DSM then
becomes available on the operation screens.
NOTE: For more information, see "Droplet size monitor" in the
Implement chapter of this manual.
1. Press CONFIGURATION side tab
.
2. Press
Implement
.
3. Select if Droplet size monitor is enabled or disabled. (If enabling,
also read displayed information and press
Accept
.)
4. Press RETURN arrow or CONFIGURATION side tab
to
return to the main Configuration screen.
Figure 4-9: Droplet size monitor
Nozzle selection
Nozzle selection enables up to five (5) tips to be preset for quick
recall, and the current nozzle to be selected.
NOTE: For more information, see "Nozzle selection" in the
Implement chapter of this manual.
1. Press CONFIGURATION side tab
.
2. Press
Implement
.
3. Press Nozzle selection NEXT PAGE arrow .
4. Select from:
►Nozzle preset 1-5 – selects up to five (5) tips for quick recall,
and selected the current nozzle for determining droplet size
information
►Current nozzle – displays the current nozzle
5. Press RETURN arrow or CONFIGURATION side tab
to
return to the main Configuration screen.
Figure 4-10: Nozzle selection
Summary of Contents for AEROS 9040
Page 1: ...Software version 4 31 U S E R M A N U A L AEROS 9040...
Page 116: ......
