2
www.teejet.com
Aeros 9040 field computer
HOME
SE
TUP
GUID
ANCE
FULL SCREEN
IMPLEMENT
GNSS
RA
TE C
ONTR
OL
APPENDIX
INTR
ODUC
TION
Figure 1-2: Aeros 9040 console back
Integrated RAM mount
(assembly required)
Speed digital (LAN) connection
with rubber cover
Camera connection
with rubber cover
Power connection
Speakers
GNSS antenna connection
WiFi antenna connection
USB ports with rubber covers
Buttons
Home
The Home button provides a shortcut to the Home screen.
Favorites
The Favorites button provides a shortcut to a frequently used console bottom tab. To assign a tab to the button, navigate to that tab’s
screen, then press and hold the Favorites button until it beeps.
Power on/off
On – Press the POWER button to power on the console. Upon power up, the Aeros will begin its start up sequence.
Off – Press and briefly hold the POWER button until a confirmation screen acknowledges shut down mode.
WARNING! Wait 10 seconds before restarting the console.
RealView® camera
The TeeJet Technologies RealView camera allows video images to be displayed on the Aeros screen. The camera can be pointed forward to
enable RealView guidance over video, or it can be positioned to view other operational aspects of your equipment. The camera is equipped
with a flexible RAM mount, integral sun shade and provides infrared illumination, allowing clear video images even in dark conditions.
Additional information
All changes are saved automatically.
The console needs to be cycled off and back on when changing or attaching equipment to the Aeros system.
Start up sequence
The console takes approximately two-three minutes to power up. During this time a series of screens will be displayed, LEDs will power on
and off, and brightness levels will fluctuate. Once the power up sequence has completed, the Home screen will appear.
Recommended antenna installation
The GNSS antenna should be mounted as far forward as possible on top of the cab on a metal surface of at least 10 cm × 10 cm.
USB ports
Only one USB port can be used at any given time.
Summary of Contents for AEROS 9040
Page 1: ...Software version 4 31 U S E R M A N U A L AEROS 9040...
Page 116: ......
