ISOBUS ECU 1224 User and Instruction maual
|
P00801545 Rev:02 SW:1.0.0
60
20
QUICK REFERENCE
20.1 Switch-On/Off the ISOBUS ECU 1224
The ISOBUS ECU 1224 is automatically switched-on/off when the tractor is turned on/off. There is
no physical switch on the ECU
20.2 Start new treatment
Assuming that the ISOBUS ECU 1224 was correctly configured to
start a new treatment
the user
Keep pressed valve key
button, till a message box is shown requesting your OK (ENTER).
20.3 Operating modes: Automatic, Manual
to pass in
manual mode
( User open and close valves manually)
to pass in
automatic mode
(Automatic Section Control is enabled if your Virtual terminal is
enabled for GPS ASC)
20.4 Tank Replenishment
Summary of Contents for GEOline 8410073
