ACCESSORIES HAND RAIL BRACKET
- 11 -
8
INSTALLATION
1.
Remove the bracket from its original packaging.
2.
Fit the upper crossbar of the bracket to the hand rail. If necessary loosen the knobs (2) to
make this easier.
3.
Fit the lower crossbar of the bracket to the hand rail. If necessary loosen the knob (3) to
make this easier. Loosen the knob (4) to adjust the height of the carriage (5) to adapt to
the dimensions of the hand rail.
4.
Tighten all the knobs (2, 3 and 4) to secure the whole assembly.
5.
Remove the positioner (6) and the coupling strip (1).
6.
Mount the strip, together with your compatible 3arm® equipment
[see 3ARM®
ROSCAMAT® COMPATIBILITY p -15-]
using the bolts provided with your equipment.
(See
detail C)
7.
Position the strip (1) and 3arm® arm assembly, and then fit the positioner (6) to secure the
coupling. Note that the strip (1) has a set position so the direction of the pin (7) must line
up with its housing
(see detail D).
This must be done by two members of staff for total safety.
