Tecnoinox P-ONE Assembly Instructions Download Page 1

Page: 1 / 3

POS. 2

POS. 1

POS. 2

Screw self-threading

3,5x20 TPS/CR

POS. 1

POS. 3

Screw self-threading

3,5x13 TC/CR

DETTAGLIO A

SCALA 1 : 1

3-4mm

STEP 1

- Check the right position of the holes to fix the cover

POS.1 and the points to fix front stop POS.2

(View DRAWING 1)

20825 BARLASSINA (MI) - via Machiavelli, 16

www.tecnoinoxsrl.it - [email protected]

ASSEMBLY INSTRUCTIONS P-ONE

STEP 2

- Fix on both side of cabinet the front stop in position

POS.2 with screws self-threading 3,5x20 TPS/CR

STEP 3

- Insert the cover using holes in position POS.1

STEP 4

- Screw until a space of 3-4mm n°4 screws self-threading

3,5x13 TC/CR and n°4 washers M4 using holes in POS.3 (View

DRAWING 1)

Summary of Contents for P-ONE

Page 2: ...lli 16 www tecnoinoxsrl it info tecnoinoxsrl it ASSEMBLY INSTRUCTION P ONE STEP 6 Fix the front side panel and fix the steel back components using screws M4x25 TC CR for steel back panel or M4x10 TC CR for wood back side panel STEP 7 Put the drawer inside the cabinet and adjust the front side panel using the standard settings of the drawer STEP 8 Insert bottom components ...

Page 3: ...E STEP 11 Verify the closure of the drawer in the case it doesn t close probably due to a friction between bins and cover rotate the front screw to regulate the stop position of the cover STEP 10 Insert bins STEP 9 Fix rails using screws fixed before in front panel and using n 2 viti M4x16 TC CR to fix them to the back steel components ...