GB / IE - 3
5410.307.01
Part 3
Maintenance
Cleaning and care of the appliance
Do not wash the appliance with jets of water because if water gets into
the electric components it could cause the appliance and the safety
systems to malfunction!
If the appliance won't be used for a long period of time, it should be
thoroughly cleaned and covered with a protective sheet of the type
commonly found in shops.
Malfunctions
Malfunctions do not always depend on the quality of the components
used. These appliances are manufactured using top quality
components. Malfunctions may be caused by voltage surges, dust
and/or dirt getting into the components.
In any case, if anomalies are noticed or suspected, turn the appliance
off and disconnect it from the mains. Call the authorised repair service.
Unauthorised persons should never attempt to repair the appliance, or carry out maintenance. Tampering with the appliance voids the warranty!
Maintenance
No particular maintenance is necessary other than normal cleaning.
The appliance should be checked once a year by a repair service.
For this purpose a maintenance contract should be stipulated.
Ecology and environment
Our appliances are studied and optimised, with lab tests, to provide high
performance and yields. However, to keep energy consumption low
(electricity, gas and water), we suggest not using the appliance for any
length of time if it is empty or in conditions that compromise optimum
yield. All packaging materials are environment-friendly. They can be
kept without problem or burnt in a waste incinerator plant.
The plastic components that can be recycled are:
Polyethylene: external packaging material and/or pluribol film
Polypropylene: straps
Polystyrene foam: corner pieces, sheets and protection blocks
At the end of the appliance’s useful life, dispose of it properly.
90% of each appliance is made of metal (stainless steel, iron,
aluminated sheet, etc.) hence it can be recycled by the relative recycling
organisations in compliance with the standards in force in your country.
Prepare the appliance for disposal, so it cannot be used any
more, by removing the power cable and any locks to prevent
anyone getting locked inside accidentally.
