background image

 

 
 

 

TECNOCONTROL S.r.l. - Via Miglioli, 47 20090 SEGRATE (MI) - Tel. 02/26922890 - Fax 02/2133734 

http:

 

www.tecnocontrol.it

  

e-mail:

 

[email protected]

 

 

EN

 

 

 

IST-2236.ZO01.02/A 

File: IST-2236.ZO01.02-A_TS236-TS237 (EN).doc 

 
 

OXYGEN 

TRANSMITTER 

 
 
 

TS236 

flue gases temperature up to 300°C 

 
 

TS237 

flue gases temperature up to 600°C 

 
 
 
 
 

USER INSTRUCTIONS 

 

Summary of Contents for TS236

Page 1: ...26922890 Fax 02 2133734 http www tecnocontrol it e mail info tecnocontrol it EN IST 2236 ZO01 02 A File IST 2236 ZO01 02 A_TS236 TS237 EN doc OXYGEN TRANSMITTER TS236 flue gases temperature up to 300 C TS237 flue gases temperature up to 600 C USER INSTRUCTIONS ...

Page 2: ...6 Standard Probe Body 300 C TS237 High Temperature Probe Body 600 C Response Timing T90 10 seconds Repeatability 1 on signal Medium Life 160 000 Hours SERVICE We suggest to allow service inspections only to trained and qualified people especially for sensors test and calibration On demand TECNOCONTROL is able to offer programmed service agreements each six months beginning and half season or once ...

Page 3: ...g circuit and the terminals for the external connections The probe is connected to the housing by 1 meter cable INSTALLATION The Oxygen Transmitter unit has to be installed near the boiler to analyze The Oxygen probe has to be placed on the chimney pipe fitting to a distance equivalent to two diameters of the pipe fitting itself The distance between the probe and the housing is bound by the 1 mete...

Page 4: ...Oxygen Sensor automatically calibrates itself to check the O2 sensor calibration it is necessary Unthread the Probe Body from the chimney Verify that after 1 3 minutes in clean air the output is about 20mA that correspond to 20 9 Oxygen In case you don t see this value turn the SPAN trimmer of the O2 transmitter circuit Placed inside the aluminium housing up to obtain the right value 20mA Check an...

Reviews: