Operation Manual
IBZA Series | rev.
2.5
12
2.3 Point Source with low-frequency element
In this configuration, the frequency response of the IBZA10 is extended in the low end.
IBZA10 enclosure is driven by the PA4.450, PA900 or PA2100 amplifier with the DP Series
Processor or T-44/T-48 Series amplifier controller both with same factory preset as in point
source configuration. The subwoofer will be operating with its corresponding factory preset. The
upper frequency limit must be 100 Hz for an optimal acoustic coupling with the enclosure.
If your IBZA10 loudspeakers and subwoofers are separated by a greater distance - or delay
must be used between them - a measurement system such as
SMAART
should be used to
determine the correct delay and polarity.
SW-115
Frequency Range (+/- 6dB)
38- 18KHz
Recommended ratio
1xSW-115: 4xIBZA10
Summary of Contents for IBZA Series
Page 2: ......
Page 20: ...Operation Manual 19 IBZA Series rev 2 5 IBZA10 Dimensions ...
