Technical Specifications
16
IBZA Series | rev.
2.50
5
Technical specifications
IBZA6 FULL-RANGE COMPACT LOUDSPEAKER SPECIFICATIONS
ACOUSTICAL
Operating Frequency Range
82Hz -20 kHz±3dB
, measured on axis.
95Hz-18kHz
Recommended operating frequency range.
Response depends on loading conditions and room acoustics
Axial Sensitivity
93 dB (1w/1m)
Calculated SPL
116 dB continuous/122 Peak
Nominal Dispersion
80º Axis-symmetric
Power Handling
200 W AES / 400 Continuous
COMPONENTS
Low Frequency
1 x 6-inch cone driver ferrite magnets, direct radiation, bass-reflex
Nominal impedance: 8Ω
Voice coil size: 1.46-inch
Power Handling Capability: 170 W AES / 340 W continuous
Note
: Power Handling measured using AES Standards= 2 hours test made with continuous pink noise
signal (6 dB crest factor).
High Frequency
1 x 1-inch dome tweeter on symmetric horn
Nominal impedance: 8Ω
Voice coil size: 1-inch
Power Handling Capability: 30 W AES / 60 W continuous
Note
: Power Handling measured using AES Standards= 2 hours test made with continuous pink noise
signal (6 dB crest factor).
AUDIO INPUT
Connectors
IN: 1 x NL4 SpeakON
®
LINK: 1 x NL4 SpeakON
®
Wiring
Pin 1+/-: Input Signal ; Pin 2+/- : Parallel
PHYSICAL
Enclosure
16mm birch plywood. Finished in Polyurea surface.
Protective Grille
Powder-coated perforated steel with acoustically transparent reticulated foam
Rigging
2 x M6 insert for TUB-6 U-Bracket
Dimensions (HxWxD)
330mm x 215mm x 207mm (13.07” x 8.46” x 8.11”)
Weight
4,5 Kg. (14.10 lbs)
Custom finish
White code available on request Without charge. RAL code on special order.
Application information is presented for guidance only. Exel Acoustics SL reserves the right to make any necessary
changes to the products and the published specifications. As part of the ongoing development program Exel Acoustics
SL tries to maintain the highest degree of product compatibility.
