Operation Manual
IBZA Series | rev.
2.00
13
3
Configuration
Tecnare
®
Sound Systems recommended operating the
IBZA6
loudspeaker together
Tecnare loudspeaker controllers.
Tecnare
®
only recommends using preset/amplifier developed
by Tecnare
; otherwise there is
a risk of damaging the loudspeaker components.
DP Series Loudspeaker Controller
,
PA Series
amplifier and
T-Series
amplifier are ideal for this purpose.
Ensure that the right preset was selected before connecting the loudspeaker with the
amplifier.
Operating with an incorrect preset can damage part of the loudspeaker.
Ensure that the amplifier is properly size according to requirements. Under-power or
oversize power amplifier without the supervision of an expert may damage the loudspeaker.
Please note the technical specification section.
3.1 Connection to PA4.450
MAXIMUM OF 4 ENCLOSURES PER PA4.450
2 x IBZA6 can be connected to each output channel on the PA4.450. Therefore, a single
PA4.450 amplifier controller can drive up to 8 enclosures.
Impedance load
: 8Ω
for 1 enclosure, 4Ω for 2 enclosures
.
