background image

Never use accessories, which are not recommended by the 
producer.  They could constitute a danger to the user and risk 
to damage the appliance.  

Never use any other connector than the one provided. 

Never move the appliance by pulling the cord. Make sure the 
cord cannot get caught in any way.   

Never wind the cord around the appliance and do not bend it 

Ensure that the power cord does not come into contact with hot 
parts of this unit. 

Make sure the appliance has cooled down before cleaning and 
storing it.  

The temperature of accessible surfaces may be very high when 
the appliance is operating. Never touch these parts, of 
apparatus, to avoid burning itself.  

Make sure the appliance never comes into contact with 
flammable materials, such as curtains, cloth, etc...& the power 
cord and plug do not come in contact with water.  

Before cleaning, always unplug the appliance from the power 
supply and let it cool down.  

This appliance is not intended to be operated by means of an 
external timer or separate remote-control system. 

Always place the unit on a flat surface. Ensure, also, not to 
cover the device and not to put anything on it. 

Always remove the plug from the wall socket when the 
appliance is not in use. 

When using an extension lead always make sure that the entire 
cable is unwound from the reel. Use solely CE approved 
extension leads. Input power must be at least 16A, 250V, 
3000W. 

Incorrect operation and improper use can damage the appliance 
and cause injury to the user. 

 

Summary of Contents for TNV-332


















Reviews: