Refill water during operation
1. Unplug the power cord and disconnect the power supply.
2. Press down the steam button to release the pressure until no steam is injected out.
3. Slowly unscrew the safety cap By pushing down and turning left,
4. but do not remove it, and residual steam will be discharged slowly until no steam
comes out.
5. Then place the machine in a cool place to cool it down for about five minutes.
Finally, completely remove the safety cap.
6. Use the funnel and measuring cup to refill a suitable quantity of warm or hot water
into the tank.
7. Re-install the safety cap onto the machine body and tighten it in position.
After the machine is used
1. After the cleaning machine is used, unplug the power cord and disconnect the
power supply.
2. Press down the steam button to release the pressure until no steam is injected out.
3. Slowly unscrew the safety cap but do not remove it, and residual steam will be
discharged slowly until no steam comes out. Then place the machine in a cool place
to cool it down for about five minutes. Finally, completely remove the safety cap.
4. Empty the residual water in the tank and clean the external surface with a piece of
dry cloth.
5. At last, re-install the safety cap onto the machine body and tighten it in position.
Note : Re-install the safety cap onto the machine body and tighten it in position.
CLEANING AND MAINTENANCE
- Always unplug the appliance and let it cool before cleaning.
Caution: Never immerse the device in water or any liquid.
Clean the outside of the elements with a sponge or a damp cloth and a little
dishwashing liquid if necessary.
14
