Switch on power supply, and the machine immediately starts heating process. When
it heats to specified temperature, press the steam button, and steam will be sprayed
out slowly.
So the machine is easy to operate.
With complete cleaning accessories supplied, the machine can be assembled and
disassembled easily. It can be used to clean the doors, windows, floor boards and
clothes, and thus is applicable widely.
Functions
Disinfection
Sterilization
Cleaning the clothes
Cleaning doors and windows
Cleaning the floor boards …
Operating Instructions
1. First, place the steam cleaner on a level platform, push down the safety cover,
2. unscrew the safety cap counter clockwise, and then install the funnel.
3. Take 200ml clean water with the measuring cup, and add the water into the tank.
(Max. capacity of the tank is 300ml.
NOTE : Do not overfill the tank and some space must be left in the tank).
4. Re-install the safety cap and tighten it in position
5. Check the power supply and socket, and confirm it comply with the requirements
given in the User Manual. Then turn on the power supply.
6. About 4 minutes after power supply is turned on, steam is ready.
7. At this time lightly press the steam button and check whether steam is sprayed out
of the nozzle. (Do not aim the spray nozzle at other persons or objects).
8. If there is steam sprayed out, please install suitable accessories according to your
needs after you release the button.
9. Press down the steam button again in order to carry out the operations required by
you.
Installation of Accessories
1. Install the spray cup with hairbrush
Hold the pipe section of the spray cup with hairbrush in
your hand, align the arrow on the spray cup with the
12
