17
Preset Tuning
This feature is used to store up to 30 FM, AM stations in
memory.
Automatic Memory Presetting
1. Press the TUNER input selector.
2. Select AM or FM by pressing the BAND selector button.
3. Press the MEMORY button for more than 1.5 seconds.
The start frequency will show in the display.
• 87.5 MHz in FM, 530 kHz in AM.
The frequency and display will automatically scan.
• 100 kHz steps for FM, 10 kHz steps for AM.
The frequency shown in the display will rapidly change.
As each station is located a preset number will appear
in the display indicating which preset MEMORY button
has been assigned to the station located. The scanning
process will continue to operate until 30 stations have
been found and entered into the preset memory. When
there are no more stations to be found on the waveband
chosen, the memory indicator will extinguish and let you
hear the last station to be memorized.
• To listen to a desired memorized station select the
band and press the numeric keys button 1, 2, 3 etc.
4. The last memorized channel of each band will be dis-
played when Auto Memory is completed. You can check
the programmed frequencies with PRESET UP and
DOWN button.
3
2
1
Manual Memory Presetting
1. Press the TUNER input selector.
2. Select AM or FM by pressing the BAND selector button.
3. Press the MODE button to change to TUNING mode.
(The PRESET CH. indicator disappears from the display).
4. Select the frequency you want to preset by pressing UP
or DOWN tuning button.
5. Press the MEMORY button briefly, MEMORY display will
blink at an interval of 1 second.
6. While the MEMORY indicator is lit, press the numeric
key(s) to input the channel number for the station to be
stored (or press the PRESET button then press the
MEMORY button again).
Recalling Frequencies
Press the numeric key(s) corresponding to the channel
number to tune directly to a broadcast.
Using the Memory Scan function on the Remote
Control
When the MEMORY SCAN button is pressed, the preset
stations in which frequencies have been stored are
scanned at 5-second intervals. When you hear a broadcast
you want to listen to, turn the Memory Scan function off by
pressing the MEMORY SCAN button again.
