TSR 2800-10C Hardware Installation Manual
- 16 -
Note
:
After taking off the cover, put it horizontally and avoid it to be crushed or collided.
4.2 Closing the Machine Box
The section mainly describes how to put the cover and close the machine box. Do as
follows:
Put them well according to their locations and joint them together along their
sides. See the following figure.
When the cover and the bottom are closely tied, let the cover slide the slot of the
front template at the bottom.
Nail the bolt and screw it tightly with the screwdriver.
Reinstall the router on the cabinet or the desk.
Reconnect all cables of the router.
