Setting Up
41
8.6
Final steps after start-up
Prior to using the unit/system, it must be absolutely ensured that there are no
safety-critical defects or malfunctions. After the completion of the tasks and prior to
switching the unit/system on, comply with the following (if applicable):
•
Ensure that any safety devices, guards and covers which were removed
prior to commencing the tasks have been properly reinstalled.
•
Ensure that the area around the unit/system is free from tools, materials or
other pieces of equipment that had to be used.
•
Clean the workspace and remove any liquid spills or similar substances.
•
Check whether the safety devices and guards of the unit/system operate
correctly.
