![technotrans termotek P70100-24495 Original Instruction Manual Download Page 34](http://html.mh-extra.com/html/technotrans/termotek-p70100-24495/termotek-p70100-24495_original-instruction-manual_1070707034.webp)
Setting Up
34
8
Setting Up
8.1
Notes
The following must be observed in order to avoid injuries and damage to property:
•
Only qualified personnel are authorised to perform these tasks.
•
Comply with the information given in the "Safety" section.
WARNING
Risk due to incorrect installation/start-up!
There is an increased risk of injury for persons who perform tasks for which they
are neither qualified nor trained.
•
Only persons who are familiar with the tasks, who have been informed
about the associated hazards and who have the necessary qualifications
are authorised to install/start the unit.
•
All technical safety conditions must be fulfilled prior to the installation/start-
up.
•
The location of the unit or system must comply with the specifications that
are stated in the chapter "Transport/Location selection".
WARNING
Risk of injury!
There is an increased risk of injury when working on the machine.
•
Observe the "Safety" section.
•
Start-up, maintenance, and repair work should be performed only by
trained and specialised personnel.
•
Ensure that the machine is at a complete standstill and secured against
inadvertent start-up prior to working on it.
•
Comply with the safety instructions in the operating manuals of the
connected units/machines.
NOTE
•
Observe national and local regulations regarding liquids that are
hazardous to water (e.g. German Federal Water Act (WHG)).
•
The owner is responsible for ensuring that the system meets the
requirements for quality and operation.
For further information regarding connections, versions, pressure specifications,
settings etc. please refer to the following chapters:
•
Layout / System layout
•
Maintenance
•
Technical Data
as well as the instruction labels on the unit (if provided).