Technoton MasterCAN CAN2RS, Operation Manual, Page: 48 / 54

Annex A SPN of converters Functional modules / Self-diagnostics FM
MasterCAN RS2CAN / CAN2RS data converters. Operation manual. Version 1.0
© Technoton, 2020 48
Annex A
SPN of converters Functional modules
Data conversion, configuration and self-diagnostics are ensured by the well-concerted
operation of the data converters
Functional modules (FM).
The format of parameters ( SPN ) of FM data converter corresponds to S6 Database (S6 DB).
A.1 Self-diagnostics FM
Self-diagnostics FM — designed for user authorization, identification of data converter passport
data, operation time recording and also active malfunctions.
a) for MasterCAN RS2CAN b) for MasterCAN CAN2RS
Figure A.1 — Example of the window of settings of FM Self-diagnostics
in Service S6 MasterCAN software
Table A.1 — Self-diagnostics FM. Displayed and/or editable SPN
with the help of Service S6 DUT-E software
SPN Name Factory value
Unit
of measure
Clarification
Unit passport PGN 62995
521120 Serial number On the fact No Serial number is a set of numbers that is used for identification of
specific Unit.
MasterCAN serial number has the following format:
AABBB C DDDDD, where:
AA
– code of converter model;
BBB – digits that reflect changes product changes;
C – Manufacturer code;
DDDDD – sequential number.
Setting is not available for editing.
521345 Model On the fact No Model – this is version of the converter inside of MasterCAN
product line MasterCAN.
Each model (
MasterCAN RS2CAN or MasterCAN CAN2RS ) has its
own functional and constructive features.
Setting is not available for editing.
521123 Line MasterCAN No Name of the product line.
The line represents a group of similar products – produced under
general trademark MasterCAN .
Setting is not available for editing.
521344 Mark TECHNOTON No Name of converter Manufacturer .
Setting is not available for editing.
521121 Firmware
Version
On the fact No Version of built in Software converter.
Setting is not available for editing.