17/04/2019
–
TPF-Eco version u111
NOTE
–
the app will not allow you to create an account if it
cannot detect your Eco Interface.
If you see the error message below, make sure the Eco Interface
is properly connected to the router and you have used the
correct code as the identifier. Then try again.
2C
–
Connecting to your Panels
•
Go to Settings -> My devices -> Add a device -> Heating -> Electrical -> Minor 1000
•
Hold down the receiver button on the panel until it flashes.
•
Press “To Associate” and wait for the app to find the panel.
•
Press OK.
•
Repeat for every panel you want to control via the app.
