Technosoft 2016
6
IO-iPOS4808MY Technical Reference
1 Safety information
Read carefully the information presented in this chapter before carrying out the drive installation
and setup!
It is imperative to implement the safety instructions listed hereunder
.
This information is intended to protect you, the drive and the accompanying equipment during the product
operation. Incorrect handling of the drive can lead to personal injury or material damage.
Only qualified personnel may install, setup, operate and maintain the drive. A “qualified person” has the
knowledge and authorization to perform tasks such as transporting, assembling, installing, commissioning
and operating drives.
The following safety symbols are used in this manual:
WARNING!
SIGNALS A DANGER TO THE OPERATOR WHICH MIGHT CAUSE
BODILY INJURY. MAY INCLUDE INSTRUCTIONS TO PREVENT THIS
SITUATION
CAUTION!
SIGNALS A DANGER FOR THE DRIVE WHICH MIGHT DAMAGE THE
PRODUCT OR OTHER EQUIPMENT. MAY INCLUDE INSTRUCTIONS
TO AVOID THIS SITUATION
CAUTION!
Indicates areas SENSITIVE TO electrostatic discharges (ESD) WHICH
REQUIRE HANDLING IN AN ESD PROTECTED ENVIRONMENT
1.1 Warnings
WARNING!
THE VOLTAGE USED IN THE DRIVE MIGHT CAUSE ELECTRICAL
SHOCKS. DO NOT TOUCH LIVE PARTS WHILE THE POWER
SUPPLIES ARE ON
WARNING!
TO AVOID ELECTRIC ARCING AND HAZARDS, NEVER CONNECT /
DISCONNECT WIRES FROM THE DRIVE WHILE THE POWER
SUPPLIES ARE ON
WARNING!
THE DRIVE MAY HAVE HOT SURFACES DURING OPERATION.
WARNING!
DURING DRIVE OPERATION, THE CONTROLLED MOTOR WILL
MOVE. KEEP AWAY FROM ALL MOVING PARTS TO AVOID INJURY
