Technomate TM-Nano-3T Combo User Manual Download Page 43

Page: 43 / 66

TM-NANO-3T Combo User’s Manual

: Allows you to use yellow DVB subtitle.

• Use DVB subtitles position

: Allows you to set position of the DVB subtitle.

• Centered DVB subtitles

: Allows you to center the position of the DVB subtitle.

• DVB subtitle black transparency

: Allows you to set the transparency of the DVB subtitle.

• Yellow pango subtitles

: Allows you to use Yellow pango DVB subtitle.

2-2-6. Auto Language Selection

You can select the language in which the menu would be displayed. In addition to that, you can select

which language of audio track and of subtitle & EPG track should be output.

• Audio / Subtitle / EPG language

: Set the 1st Audio Language option and the 2nd

Audio Language option to your desired languages.

When you watch a program, if the program has an

audio track of the language that is designated for

the 1st Audio Language, it will be output. If the first

language is not available but the second language

is available, the audio of the second language will

be output.

•

Prefer AC3

: If set to "yes" the STB will use AC3 sound (when available).

•

Prefer audio stream stored by service

: If set to "yes" the STB will use the audio stream that has been used earlier.

•

Allow subtitle equals Audio mask

: Allows displaying subtitle that equals the chosen audio.

•

Allow hearing impaired subtitles

: Allows displaying the special hearing impaired subtitles.

•

Prefer hearing impaired subtitles

: Allows you to prefer the special hearing impaired subtitles over normal subtitles.

•

Prefer DVB-graphical subtitles

: Allows you to prefer the DVB-graphical subtitles over teletext subtitles.

•

Prefer subtitle stored by service

: It set to "Yes" the STB will use the subtitles that has been used earlier.

2-2-7. Hard disk

• Hard disk setup

Summary of Contents for TM-Nano-3T Combo



































































Search results

Summary of Contents for TM-Nano-3T Combo

Reviews:

Related manuals for TM-Nano-3T Combo

Brands by name

Popular brands

Technomate TM-Nano-3T Combo, User Manual

Search results

Summary of Contents for TM-Nano-3T Combo

Reviews:

Related manuals for TM-Nano-3T Combo

Brands by name

Popular brands