WARNING!
The HDMI 4 to 2 Matrix Switch includes a 230V mains adaptor, which supplies 5V
DC. All normal precautions should be observed towards electronics devices. Do
not spill any liquids on the unit or power supply. Do not attempt to service the unit.
Do not cover the unit, do allow for ventilation. Do not spray the unit with any com-
bustible substances.
In the unlikely event the unit falters for any reason, disconnect from the mains
supply and retry after a few minutes. Contact information is provided below.
Input:
4x HDMI.
Resolutions from 480i to 1080p inclusive.
HDMI 1.3 3D and HDCP compatible.
Output:
2x HDMI.
Remote Control:
IR remote with CR2025 battery (included).
Power:
5V DC power supply, 2A.
Dimensions:
200x100x20mm.
Technical Specification.
J.S. Technology Ltd.,
APL Centre,
Stevenston Ind. Est.,
Stevenston.
Ayrshire
KA20 3LR
© 2016.
E-mail: [email protected] Tel: 01294 471468 Fax: 01294 470916
HDMI 4 to 2 Matrix Switch.
http://www.js-technology.com
Instruction Manual.
Connect four HDMI sources to two HDMI displays.
Matrix function—Same picture to both screens, or different to each.
Supports HDMI 1.3 and 3D.
Supports 12-bit Deep Colour.
1080p, 2k and 1920x1200 compatible.
Gold plated connectors.
Discrete IR Remote Control.
HDCP Compatible.
Optional Stereo Audio Output for one OUTPUT A.
It is recommended that good quality cables / leads be used with the matrix switch. Suit-
able leads are available from J.S. Technology as well as most good retailers. The unit
requires 5V DC supply to operate, a suitable mains adaptor is provided.
2016.
Front
Rear
