WT 180 - Radio controlled alarm clock
Instructions manual
Front view
Back view
Part A - LCD
Part B - Buttons
Part C - Structure
A1: DCF icon
B1: “SNOOZE/LIGHT” button
C1: Battery Compartment
A2 : Radio controlled time
B2: “MODE/SET” button
A3: Alarm icon
B3: “+(12/24)” button
A4: Month and date
B4: “-(°C/°F)” buttton
A5: Temperature
B5: “AL ON/OFF” button
B6: “RESET” button
Set up and radio controlled time
•
Insert 2 x AA batteries (not included) by observing the correct polarity signs (+/-) inside the battery compartment.
•
The clock automatically starts scanning the RF 433MHz signal to register new thermo sensor unit after new
batteries inserted. After registered the thermo sensor or press “CHANNEL” button to stop scanning, the clock
will then automatically starts scanning the DCF time signal (“
” flashes on the LCD).
“
” flashes indicate now is receiving the DCF signal.
“
” turns on indicate signal received successfully.
“DST” show on the LCD if it is in Daylight Saving Time Mode.
