Foldable
stand
Hanging Holes
Foldable stand
Battery cover
Radio controlled reception icon
Indoor Temperature display
in ºC/ºF
or seconds display
Date
Moon phase icon
Weekday
DCF time
Alarm icon
Battery compartment
Battery
cover
MOON PHASE CLOCK
Instruction Manual
INTRODUCTION
Congratulations on purchasing this state-of-the-art Moon Phase Clock as an example of superior
design and engineering. Providing radio-controlled time, date, indoor temperature display, and Moon
phases, this innovative clock is ideal for home or office use. Operation of this product is simple and
straightforward. By reading this operating manual, the user will receive a better understanding of the
functions and the optimum benefit of all its features.
Moon Phase Clock:
FEATURES
DCF-77 Radio controlled time with manual setting option
12/24 hour display
Time display: hour, minute and seconds
Calendar
display
Weekday display with seven languages option: German, English, French, Spanish, Italian, Dutch
and Danish.
Time zone options ±12 hours
Alarm setting with snooze function
Indoor temperature display in degree Celsius or Fahrenheit
Display of 8 Moon phases throughout the year
Wall mountable or free standing
SETTING UP
1.
Slide the battery cover open on the Moon Phase Clock as indicated.
2.
Checking the correct polarization, insert 2 x AA IEC LR6, 1.5V batteries into the battery
compartment and replace the battery cover.
3.
Once the batteries are in place while beep sounds shortly, all segments of the LCD will light up
briefly. Then the indoor temperature, the time as 0:00, the date as 1/1, weekday as MON and the
Moon phase will be displayed.
4.
The DCF-77 time code reception will automatically start. This takes typically between 3 - 5
minutes in good conditions. If after 10 minutes the DCF time has not been received, the clock
will automatically attempt to receive the DCF time at the next full hour. When this is successful,
the received time will be displayed. The date and Moon phase will also be updated with the
received time (Please refer also to notes on “
Radio controlled time
”)
BATTERIES CHANGE
For best performance, batteries should be replaced at least once and a year to maintain the best
running accuracy. Ensure that the batteries used are new of the correct size.
Note
:
Always wait for 30 seconds after removing the batteries before reinserting, otherwise start up and
transmission problems may occur.
Please help in the preservation of the environment and return used batteries to an
authorized depot.
FUNCTION KEYS
The Moon Phase Clock has four easy to use keys:
Function keys
SET key
:
To enter the manual setting modes if press for about 1 second
To stop the alarm
+ key
:
To change the values in all setting modes
To
a
lternate between indoor temperature and seconds display
To stop the alarm
LCD 2 display
ALM key
:
To enter the alarm setting mode if press for about 1 seconds
To set the alarm ON/OFF
To stop the alarm
SNOOZE key
:
To activate the snooze function during alarm
To switch OFF the alarm for the next 24 hours if pressed for about 1 second during
alarm function or snooze
To stop the alarm
To exit any setting modes
LCD SCREEN
The Moon Phase Clock's LCD is divided into 2 sections and once the batteries are inserted, all the
segments will light up briefly before displaying:
LCD 1 display
LCD1- DCF RADIO CONTROLLED TIME, ALARM AND SNOOZE
Once the batteries are inserted into the battery compartment, the Moon Phase Clock will receive the
DCF time within 3-5 minutes. Once received, all segments of the clock will display the informations
accordingly, then no further reception will take place for the DCF signal that day.
The DCF reception takes places at 2:00 and 3:00 am each day. If the clock is unable to receive the
reception, it will attempt to receive the DCF time at the next full hour or as long as it receives the DCF
time successfully.
