Technoline WS 9060, Manual

Page: 18 / 32

EN7
Note: alarm ringing time is 2 minutes.
Snooze Function
：

When the alarm occurs, press "SNOOZE/LIGHT" to stop the alarm, the alarm symbol "
” and
snooze symbol "ZZ" will flash on the display. It will alarm again after designated snooze time.
Note: When alarm “OFF”, "SNOOZE/LIGHT" button does not have snooze function.
Displaying Temperature Humidity and Temperature Humidity Trend
：

The main device will automatically detect the temperature and humidity of its area every 1
minute and shows the value in the
“ ” column.

When the wireless remote sensor is connected successfully to the main device, the temperature
and humidity detected by the wireless sensors will be transmitted to the main device every 1
minutes and value will be shown on “ ” column.

At the same time, the main device will calculate the trend of temperature and humidity changes
according to the INDOOR and OUTDOOR detected value, and display the temperature and
humidity trends as below:
“ ”
The temperature or humidity is rising.
“ ”
The temperature or humidity is remaining constant.
“ ”
The temperature or humidity is falling.
Note: if the main device detected or received temperature exceeds the display range, the value of
the temperature will display "HH" and "LL", "HH" means the detected or received temperature higher
than the display value, "LL" means the detected or received temperature below the display value (for
INDOOR and OUTDOOR display range, please see the technical specification)
Wireless sensor transmission
：

After the wireless sensor connected to main device successfully, the detected temperature and
humidity value of the wireless remote sensor will be sent to the main device and shown in the
“ ” column , at the same time, wireless channel number will be displayed as well.

The weather station can connect up to 3 wireless sensor channels, you can choose different
channel while toggle switches (CH1, CH2&CH3) on the main device. If icon “ ” shows up,
means the wireless sensor had been connected to the main device successfully.
Note: When using multiple wireless sensor, you must choose different channels, if you choose the
same channel, the main device can receive only one wireless sensor and other sensors in the same
channels will not be received.
If the wireless sensor has no channel selection function, the sensor defaults to CH1.
Press“▼/CH” button to select different channel. When switching, the different values are displayed in
the main device accordingly, and total up to 3 channels can be selected. When " " is displayed,
the channel is automatically switched every 5 seconds.
If one of the channel temperature and humidity display "--
" on the main device, and the symbol “ ”
does not show up which means the wireless remote sensor does not connect with the main device
correctly, press the “▼/CH” button for 2 seconds to re-connect the wireless sensor until and “
” show on the screen.