28
09
BYPASS enable/disable setting
Press Enter button
to change
the setting(ON or OFF).
Press UP button ▲ to select the
previous setting.
Press DOWN button ▼ to save
and exit the setup.
10
；
Generator mode setting
Press Enter button
to change
the setting(ON or OFF).
The factory default is: OFF, need
to be manually set after the
generator is manually connected;
Press the up button ▲ to select
the previous option;
Press DOWN button ▼ to save
and exit the setup.
Pres
utton ▼ to select the next
option;
3-4
Operating Mode Description
Mode
Description
Indicator
Line Mode
The inverter green LED is on.
When input AC mains is in line with the working conditions,
UPS will work in line mode,charge the battery and protect
the load.
Battery Mode
Both the inverter green LED and battery yellow LED is
on,and the buzzer beeps once per 4 seconds.
When the mains power down or instable, UPS will turn to
Battery Mode at once. If the mains recovers,the UPS will
transfer to line mode.
If battery voltage low alarm activates, the indicator of battery
LED flashes. If battery voltage reaches low limit, UPS will
turn off to protect the battery. UPS will auto-restart when the
mains recover.
NOTE：The back up time of Battery Mode is
subject to the load and EBP numbers.
