AutoGRAPH-ST
– Remote Control Command
27
SMTPFROM
Command
SMTPFROM
Name
Mail account of the device
Supported with firmware
AGST-0.75 and higher
Description
Command is intended to set mail address which the
device uses to send Email.
Command format:
password SMTPFROM=username;
parameters of the command:
username
– full mail address which will be used by the device to send Email. Full mail
address includes a user login,
“@” symbol and domain name of the mail server.
Sample command:
5672 [email protected];
Sample reply:
The device uses following mail address for sending Email -
