AutoGRAPH- ST
– Remote Control Command
26
SMTPPASS
Command
SMTPPASS
Name
Password for accessing the SMTP server
Supported with firmware
AGST-0.75 and higher
Description
Command is intended to set up a password used to
access to SMTP server. To set a login, use
“SMTPLOGIN” command.
Command format:
password SMTPPASS=password;
parameters of the command:
password
– password used to access to SMTP server.
Пример команды:
5672 SMTPPASS=userpassword;
Пример ответа:
#SMTPPASS=userpassword;
The device uses the following password to access to SMTP server
– userpassword.
