TechnoKom AutoGRAPH STEALTH, Command Manual

Page: 22 / 67

AutoGRAPH-ST
– Remote Control Command
23
SMTPSERVER
Command SMTPSERVER
Name SMTP server address
Supported with firmware
AGST-0.75 and higher
Description Command is intended to set SMTP server address
which will be used for sending Email with current
coordinates.
Command format:
password SMTPSERVER=server;
parameters of the command:

server
– an address of SMTP server.
Sample command:
5672 SMTPSERVER=smtp.mail.ru;
Sample reply:
#SMTPSERVER=smtp.mail.ru;
The device is set up to send Email via following SMTP server
– smtp.mail.ru.