AutoGRAPH-NAVIGATOR • USER MANUAL
21
TechnoKom © 2015
Connection
Connection menu is intended to indicate operation of GLONASS/GPS receiver and GSM
modem of the AutoGRAPH-NAVIGATOR device.
The menu consists of two sections:
•
GSM
– provides indication of GSM modem operation.
•
GPS
– provides indication of GLONASS/GPS receiver operation.
GSM menu
In this menu, the user can check GSM modem operation, including state of file loading, data
transmission, and etc.
Information available in this menu is described below:
1. Serial number
– AutoGRAPH-NAVIGATOR serial number.
2. GSM signal level in dBm.
3. Active SIM
– SIM number currently used by the device: 1 – main SIM, 2 – backup SIM.
4. Modem status
– GSM modem current status. If GSM modem is ready, its IMEI is
displayed. Also data transmission state is indicated in this field. The device collects
coordinate data and driver statuses, and sends them to data server. If there is no data to be
transferred, the messages “No data” is displayed. The modem last operation and time of the
operation are displayed in the next string, e.g “Modem was restarted: 1-10:03:37”, where
1 – time spent for the operation (in ms), 10:03:37 – time of operation.
5. File loading state
– indicates state of loading the file from data server.
Fig.14. Connection menu.
Fig.15. GSM modem status.
