Technogym WAVE EXCITE+, Service Maintenance Manual

Page: 134 / 198

Cardio WAVE : Service & maintenance manual - rev. 4.1
Pagina 7.34
7.12. DISASSEMBLING THE FOOTBOARDS (NEW VWRSION)
Valid for the following Serial Numbers (S.N.):

D4963L : From D4963L08000033 up to all S.N.

D4983D : From D4983D08000372 up to all S.N.

D4983I : From D4983I08000572 up to all S.N.

D4983L : From D4983L08000638 up to all S.N.

D4984L : From D4984L08000682 up to all S.N.

DA : all S.N.
Figure 7.12-1
Carry out the operations described in
paragraphs: 7.7. “Disassembling the guards”.
On the lever that you want to remove:
1. Lower the footboard so that the cam which is
wrapped the strap, at the position indicated in
figure
2. Lock the cam inserting a wrench behind the
clamping strap, centring a hole in the frame
behind the cam.
Figure 7.12-2
3. Back off the nut (a) (it depends from which
of the lever has to be disassembled) with a
17mm wrench, to disconnect the tie rod of
the lever from the frame.
4. Back off the 2 screws (b) (it depends from
which of the lever has to be disassembled)
,
for disconnect the lever from the rear shock
absorber, with a 6mm hexagonal wrench and
a 17mm wrench to lock down the nut on the
opposite side
Continued on following page ...