Technogym Vario Excite + 500, Service Maintenance Manual

Page: 140 / 220

VARIO : Service & maintenance manual- rev. 4.2
Page 7.40
7.10. DISASSEMBLING THE FIXED HANDGRIPS
Figure 7.10-1
Carry out the procedure described in paragraph:
7.7.1. “Disassembling the centre guard”.
Turn off the machine and unplug the mains lead
from the wall outlet.
2.
Back off the 2 screws (a) using a medium
Phillips screwdriver.
3.
Remove the upper and lower guards.
Figure 7.10-2
4. Disconnect the Hand Sensor cables, indicated
in the figure, coming from the levers.
5.
Back off the 4 screws (b) using an 8mm
hexagonal wrench.
6.
Remove the fixed handgrips.
To reassemble the fixed handgrips,
carry out the above steps in reverse order.