Technogym Vario Excite + 500, Service Maintenance Manual

Page: 123 / 220

VARIO : Service & maintenance manual- rev. 4.2
Page 7.23
7.4.2. HR R
ECEIVER
(C
HEST
B
ELT
)
Figure 7.4-4
Carry out the procedure described in paragraph:
7.4.1. “HS/HR Receiver (Chest Belt/Hand
Sensor)” up to step (3).
1.
Unplug the connector cable (a) from the
receiver.
Figure 7.4-5
CAUTION: During reassembly,
position the receiver so that the coil is
facing up toward the guard (f) as
shown in Figure 7.4-3.
To reassemble the HR Receiver, carry out the
above steps in reverse order.